Graco LineLazer V 250MMA

Graco LineLazer V 250MMA

Graco LineLazer V 250MMA

 

 

 

 

 

Graco LineLazer V 250MMA 98:2 HP Reflective Series Airless Line Striper, 1 Auto Gun, 1 Tank

The Graco LineLazer 250 MMA 98:2 is a reliable solution that delivers superior MMA 98:2 mixing performance and guarantees ratio assurance in a stand-on, self-propelled package.

 

 

 

 

Features

Ideal for Multiple MMA Applications

  • High traffic areas
  • Intersections
  • Busy streets/highways
  • Bike & pedestrian lanes

LiveLook Display with SmartControl

  • Access, measure and control all aspects of your job with real-time information
  • Simple to use and easy to see in all conditions
  • Consistent spraying pressure for perfect lines
  • Accessible proof-of-job data over USB with the J-Log system

Exclusive 98:2 mixing system

  • On-board storage tanks for MMA, BPO and solvent
  • Exclusive hard-connect MMA and BPO pump design
  • Engineered for superior ratio control, from 1.5 to 4.0%
  • Ratio assurance system and mix-manifold for outstanding performance
  • Integrated mix hose for consistency in material mixing

Automatic Gun Control System

  • Automatically stripe skip lines
  • Push button control for accurate stripes every time – reducing operator fatigue
  • Quality solenoid driven system

Exclusive Stand-On Platform

  • The integrated platform provides an ergonomic place for standing, great view and all-day comfort

Pressurised Bead System

  • Installed and ready to go
  • Large 54 kg volume bead tanks ensuring proper bead flow and paint penetration for a superior reflective performance

Honda® GX Engine

  • Reliable and easy-to-start
  • Contractor-preferred – excellent power and proven reliability
  • Oil Alert shuts down engine to prevent damage if oil level drops too low

57 Litre MMA Hopper

  • Easy to service and clean
  • Extended striping time with large capacity hopper along with 7 Litre of BPO pressure pot

Solvent Flush System

  • 7 Litre solvent reservoir and air-operated double diaphragm pump provides pressurised flushing capability of manifold, hose assembly and gun

Endurance Chromex Pump

  • Reliable, long-life pump provides precise flow for striping with MMA
  • Industry-best pump performance with field-proven design
  • Handle the most demanding materials with long-life rod treatment – 4x harder than ordinary chrome

Additional Features

  • Rear Gun Mount System
  • Graco Hydraulic Motor System
  • Self-Centring Front Wheel
  • HD Blue Texture Gun

Technical Specifications

 

Fuel Tank Capacity (L) 5.3
Gun Activation Automatic
Hopper Volume Capacity (L) 57
Maximum Flow Rate (L/min) 9.5
Maximum Sound Pressure Level (dB(A)) 89.1
Maximum Tip Size (cm) 0.1397
Maximum Tip Size (in) 0.055
Maximum Tip Size (mm) 1.3970
Maximum Working Pressure (bar) 207
Maximum Working Pressure (kPa) 2070
Maximum Working Pressure (psi) 3000
Model LineLazer V
Overall Height (cm) 141.5
Overall Height (mm) 1414.8
Overall Length (cm) 186.7
Overall Length (mm) 1866.9
Overall Width (cm) 83.8
Overall Width (mm) 838
Power Rating (kW) 8.8
Power Source Gas Hydraulic
Product series HP reflective
Pump Type Endurance
Series 200MMA
Type Walk-Behind Line Striper
Weight (kg) 405
Graco LineLazer V 200MMA

Graco LineLazer V 200MMA

Graco LineLazer V 200MMA

 

 

 

 

Graco LineLazer V 200MMA 1:1 HP Reflective Series Airless Line Striper, 1 Gun

The Graco LineLazer 200 MMA 1:1 with 1 gun is a reliable walk-behind solution that delivers superior MMA 1:1 performance and guarantees ratio assurance in a compact and affordable package.

 

 

 

 

 

Features

Ideal for Multiple MMA Applications

  • High traffic areas
  • Intersections
  • Busy streets/highways
  • Bike & pedestrian lanes

Precise MMA 1:1 Ratios

  • Innovative flow divider guarantees equal material flow of each component
  • Built-in bypass valve for independent pump operation

Lowest Operating Cost

  • No need for expensive solvents
  • No solvent pumps or tanks to maintain
  • Eliminates solvent disposal concerns

Automatic Gun Control System

  • Automatically stripe skip lines
  • Push button control for accurate stripes every time – reducing operator fatigue
  • Quality solenoid driven system

LiveLook Display with SmartControl

  • Access, measure and control all aspects of your job with real-time information
  • Simple to use and easy to see in all conditions
  • Consistent spraying pressure for perfect lines
  • Accessible proof-of-job data over USB with the J-Log system

Graco Fusion Air-Purge Gun mixes materials “at-the-gun”

  • Instant air purge after every time
  • Clears all material in the mixing chamber and eliminates build-up of material at the tip
  • Quick-release fluid housing lets you easily change the mixing chamber without tools
  • RAC 5 SwitchTips for easy clearing of a tip clog

Technical Specifications

 

Fuel Tank Capacity (L) 3.6
Gun Activation Manual, Automatic
Maximum Flow Rate (L/min) 8.14
Maximum Sound Pressure Level (dB(A)) 85.5
Maximum Tip Size (cm) 0.0838
Maximum Tip Size (in) 0.033
Maximum Tip Size (mm) 0.8382
Maximum Working Pressure (bar) 227
Maximum Working Pressure (kPa) 2270
Maximum Working Pressure (psi) 3300
Model LineLazer V
Number of Colours Two Colours
Number of Guns 1
Number of Hoppers 2
Number of Pumps 2
Overall Height (cm) 113.03
Overall Height (mm) 1130.3
Overall Length (cm) 174.63
Overall Length (mm) 1746.25
Overall Width (cm) 87.0
Overall Width (mm) 870
Power Rating (kW) 4.85
Power Source Gas Hydraulic
Product series HP reflective
Pump Type Endurance
Series 200MMA
Type Walk-Behind Line Striper
Weight (kg) 251
Graco GrindLazer RC71 E, 230V2

Graco GrindLazer RC71 E 230V

Graco GrindLazer RC71 E, 230V

 

 

 

 

Graco GrindLazer RC71 E 230V Scarifier

The Graco GrindLazer RC71 E is a great choice for those small surface preparation jobs that demand a rotary-style cutter. Make quick work of paint removal on all surfaces with this 17.5 cm (7 in.) diameter rotary scarifier.

Features

 

Graco GrindLazer RC71 E, 230V2Long Life on the Most Challenging Jobs

  • Steel and High Impact Plastic Construction
  • Proven Makita® Motor and Drive

Comfortable Handle

Maintenance-free Design

  • Sealed bearings for extended life and ease-of-use

Vacuum Port for Dust Removal

  • Allows for connection of a LazerVac vacuum system for the reduction of airborne dust

Rotary-Style Cutter

Technical Specifications

 

Cut Direction Rotary
Cutter Material Flail Tungsten Carbide
Cutter Type Rotary
Maximum Cut Width (cm) 17.5
Maximum Cut Width (mm) 178
Type Concrete Scarifier
Vacuum Port Yes
Voltage (V) 230
Water Connection No
Graco SaniSpray HP 20 Corded Handheld Airless Disinfectant Sprayer

Graco SaniSpray HP 20 Corded Airless

Graco SaniSpray HP 20 Corded Handheld Airless Disinfectant Sprayer

 

 

 

Graco SaniSpray HP 20 Corded Handheld Airless Disinfectant Sprayer

The Graco SaniSpray HP 20 is the ultimate portable disinfectant sprayer solution that delivers maximum productivity on smaller disinfecting jobs. Uniquely built with the highest-grade materials that are compatible with disinfectants, sanitisers and deodorisers.

Spray up to 591 ml (20 oz) per minute. Designed to deliver consistent edge-to-edge coverage, without heavy drips and runs, so that you can achieve specified disinfectant dwell times on smaller jobs like bathrooms, kitchens and more.

 

 

 

 

Features

 

Finish small jobs quickly

  • Perfect for areas that require maximum portability

Fill & Spray 1,242 ml (42 oz) Flexliner Bag System

  • Easily move from room to room
  • Spray in any direction, even upside-down

Adjustable flow control

  • Full range control delivers either complete coverage on specific objects or fine spray within an area

Triax Triple piston pump

  • Durable carbide piston built to deliver extended reliability and full tip support
  • The most durable, lightest weight pump
  • Fast, on-the-job pump replacement with ProConnect

Reverse-A-Clean (RAC) Spray Tips

  • Choose from 9 RAC X LP tips to meet your disinfectant’s dwell time and requirements

40 cm (15 in.) spray extension

  • Provides additional reach
  • Reduces operator chemical exposure

Brushless DC Motor

  • Dependable motor with spark-free operation provides ability to spray alcohol-based (flammable) chemicals

Ready to spray

  • Comes with everything you need – just add disinfectant and get to work

Technical Specifications

 

Compatible Replacement Pump 19Y962
Frame Configuration Handheld
Includes RAC X LP 313 Spray Tip,
RAC X LP 515 Spray Tip,
RAC X LP 619 Spray Tip,
5 – 1242 ml (42 oz) FlexLiner Bags,
40 cm (15 in.) Spray Extension,
FlexLiner Storage Plug, Storage Bag
Maximum Tip Size (in) 0.019
Maximum Working Pressure (psi) 1000
Model SaniSpray HP
Power Source Electric
Pressure Control Type Adjustable
Series 20
Type Handheld Corded Airless Sprayer
LineLazer V ES 2000 standard series, a battery-powered airless line striper, 2 manual suns2

Graco LineLazer V ES 2000 Standard Series

Graco LineLazer V ES 2000 standard series, a battery-powered airless line striper, 2 manual suns

 

 

 

 

Graco LineLazer V ES 2000 Standard Series, a battery-powered airless line striper, 2 manual guns

The Graco LineLazer V ES 2000 provides fume-free, noise-free and vibration-free striping performance on any indoor job as well as the power and features to deliver the highest productivity needed to tackle large outdoor applications. The Graco  LineLazer V Standard Series is ideal for the higher production re-striping contractor completing and considering larger re-striping jobs with basic pattern applications requiring a single-colour, single or dual gun striping solution.

 

 

 

Features

No engine noise, exhaust fumes and vibration

  • Complete your job with improved jobsite conditions at any time without interruption
  • Reduce user fatigue while delivering perfect lines on all indoor and outdoor surfaces

Quiet, reliable power

  • Two maintenance-free 12 V, 100 Ah lithium batteries
  • Stripe immediately up to 325 litres per charge
  • Bluetooth monitoring via smartphone app
  • 3 year warranty

LiveLook display with SmartControl

  • Track, measure and control every aspect of your job
  • Real-time information for the perfect lines

On-board 230V charger

  • Simply plug in to recharge using the built-in charger system
  • Get infinite spray time when using for stationary applications by running on 230 V wall power

Exclusive LineLazer frame

  • Industry’s best-balanced chassis allows for straighter lines
  • Accepts LineDriver, a 55 litre hopper, EZ Bead™ system, pointer, LaserGuide systems and LED light

MaxPower DC motor & Advantage drive

  • Maintenance-free and field-proven brushless design
  • The longest lasting drive
  • Improved jobsite conditions with extremely quiet operation

DualComfort handlebar system

  • Fits all users and easy to adjust
  • Solid 4-bolt design

EZ Align front wheel system

  • Simple front wheel alignment keeps unit tracking straight
  • Intuitive design without needing any special tools

EasyMark gun adjustment system

  • Simple guide mark system
  • Easy gun on/off, front/back
  • Perfect gun set up every time

Durable pump

  • Our endurance pump lasts 2x longer than the next leading brand
  • Long life V-Max blue packings, Chromex rod, and hardened stainless steel cylinder
  • Faster cleaning with the QuikAccess intake valve
  • The ProConnect pump can be swapped in minutes without tools eliminating costly downtime

Technical Specifications

 

Model LineLazer V
Product series Standard
Series ES 2000
Type Walk-Behind Line Striper
Graco TapeLazer HP automatic2

Graco TapeLazer HP Automatic

Graco TapeLazer HP automatic

 

 

 

Graco TapeLazer HP automatic series traffic tape applicator

The Graco TapeLazer™ is a fully-automatic traffic tape applicator that makes tape line marking user-friendly and cost effective. It includes key features from our renowned LineLazer V HP automatic stripers. Add a LineDriver to maximize productivity and to reduce fatigue on every application. Apply permanent or temporary tape, up to 35.5 cm (14 inch) long, automatically with the accuracy of a walk-behind taper and the comfort and productivity of a large taper truck. The TapeLazer HP is able to cut tape on-the-fly with the push of a button and within 8 cm (3 inch) of a road edge. Apply double lines in a single pass and pre-program skips with no layout required.

 

 

Features

 

Trouble-free cutting

  • The single, non-stick blade cuts on the non-adhesive side of the tape, eliminating adhesive build-up and the need for an oiler to maintain it. No messy oil to deal with
  • Quikchange blade replacement allows one to swap out the blade in seconds and keeps you up and running on the job, keeping downtime to a minimum

A precision-cut every time

  • An exclusive 2-stage cutting process that eliminates “pull up” of tape during cutting ensuring the best possible adhesion
  • The Precision-Cut™ System with a pneumatic brake stops the tape for an instant while cutting, resulting in a crisp, clean cut

Flexible and safe operation

  • Slide the tape carriage to the right or left to get within 8 cm (3 inch) of the road edge
  • Keeps you safe and out of traffic
  • A single wrench is needed for servicing

Fast, accurate tape loading

  • Toolless locator collars for quick/easy change-out
  • The EasyMark tape bar and guide rollers allow for quick and easy tape alignment resulting in straighter lines

HP automatic system

  • Push button control for lower operator fatigue and accurate (skip-)lines
  • Manual, semi- and automatic mode
  • System delay for accurate starts/stops

A flexible, non-stick application

  • Non-stick, Ultra-Flex rollers eliminate adhesive build-up
  • The segmented design allows the roller width to match the tape width for an optimal tamp on all applications

Debris-free design

  • Dual swivel wheels keep the front tires and debris out of the primer resulting in better adhesion

Valuable job information from the J-Log system

  • Onboard job information for proof of completion
  • A USB download allows you to capture all job data

Technical Specifications

 

Compatible tape type Permanent, Temporary
Maximum application speed (kmh) 9
Maximum application speed (mph) 6
Maximum tape width (cm) 35
Model TapeLazer
Power Rating (cc) 160
Product series HP automatic
Series HP Automatic
Weight (kg) 232
Graco ThermoLazer 200TC Thermoplastic

Graco ThermoLazer 200TC Thermoplastic

Graco ThermoLazer 200TC Thermoplastic

 

 

 

 

Graco ThermoLazer 200TC Thermoplastic Striping System

The  Graco ThermoLazer 200TC is an ideal unit to expand your thermo fleet with a small push-behind unit for smaller thermoplastic striping jobs.

Features

Direct Heat System

  • Direct flames and an on-board hand torch deliver maximum heat, resulting in maximum material flow

FlexDie System

  • Delivers excellent line quality with exclusive deep-die, all steel construction and a no-tools change out design

90 kg Material Kettle

  • Easy-to-fill cylindrical kettle allows for precise heating of thermoplastic material, and its no-tool change-out design lets you switch colours quickly

18 kg Split Bead Hopper System

  • Perfectly matched to the material kettle with a superior flow design
  • No-tool system allows fast and easy line width changes

Tri-Wheel System

  • Dual solid front and single solid rear wheels provide smooth, quiet operation

Bead Dispense System

  • No-tool system allows fast and easy line width changes
  • 30 cm dispenser with 2.5 increments allows you to “dial-in” the drop rate

Adjustable Operator Handle

  • Handle easily adjusts to multiple heights

Adjustable Front Pointer

  • Easily adjusts for all size dies for following all marks and creating straight lines

Technical Specifications

 

Compatible Material Thermoplastics, Glass Beads, Alkyds
Compatible Surfaces Pavement
Includes FlexDie
Maximum Working Pressure (bar) 17.24
Maximum Working Pressure (kPa) 172.4
Maximum Working Pressure (psi) 250
Model ThermoLazer
Number of Colours One Colour
Number of Hoppers 1
Power Source Gas
Series 200TC
Type Walk-Behind Line Striper
Weight (kg) 118
Graco ThermoLazer 300TC Thermoplastic Striping System2

Graco ThermoLazer 300TC Thermoplastic

 

 

 

 

Graco ThermoLazer 300TC Thermoplastic Striping System

Graco’s ThermoLazer 300TC is one of the most productive and easy to use thermoplastic handliners in the industry. The system’s 135 kg material kettle allows for more striping and less time spent refilling with material, while its EasyGlide Wheel Mount System makes this unit as easy to manoeuvre as a LineLazer.

 

 

 

 

Features

 

Direct Heat System

  • Direct flames and an on-board hand torch deliver maximum heat, resulting in maximum material flow

SmartDie II System

  • Fast change-out system – Hardened steel dies with a built-in mil thickness adjustment system
  • Use with or without heat – Allows you to optimise your striping in all weather conditions
  • “Floats” with the surface – Puts the thermoplastic where you want it for superior line quality
  • External heat system – 4-Torch die heat system keeps it hot

135 kg Material Kettle

  • Easy-to-fill kettle with PaddleMax Dual mixer for improved mixing

40 kg Split Bead Hopper System

  • Perfectly matched to the material kettle with a superior flow design
  • No-tool system allows fast and easy line width changes

EasyGlide Wheel Mount System

  • Front mounted caster along with dual rear pneumatic air-filled tyres makes handling safe and as easy to manoeuvre as a LineLazer striper

Bead Dispense System

  • No-tool system allows fast and easy line width changes
  • 30 cm dispenser with 2.5 increments allows you to “dial-in” the drop rate

FatTrack Front Swivel Wheel

  • Proven front caster wheel system makes turning fast and easy
  • Manoeuvre curves better
  • No need to “muscle” it while moving

Optional LineDriver System

  • Double your striping productivity and get straighter lines with less fatigue
  • Move between jobs without having to push
  • Patented Dual Pedal System – Multiple positions allow for simple forward and reverse

Technical Specifications

 

Compatible Material Thermoplastics, Glass Beads, Alkyds
Compatible Surfaces Pavement
Gun Activation Manual
Includes SmartDie II
Maximum Working Pressure (bar) 17.24
Maximum Working Pressure (kPa) 172.4
Maximum Working Pressure (psi) 250
Model ThermoLazer
Number of Colours One Colour
Number of Hoppers 1
Power Source Gas
Series 300TC
Type Walk-Behind Line Striper
Weight (kg) 134
Graco ThermoLazer ProMelt Thermoplastic2

Graco ThermoLazer ProMelt Thermoplastic

Graco ThermoLazer ProMelt Thermoplastic

 

 

 

 

Graco ThermoLazer ProMelt Thermoplastic Striping System

The Graco ThermoLazer ProMelt unit is your solution for first-time stripers wanting to get into the highly profitable thermoplastic marking business, as it lets you avoid the additional costs of adding a premelt kettle truck or trailer, thus saving you time and labour, resulting in more money in your pocket. Graco’s breakthrough technology allows you to melt 135 kg of thermoplastic on board in less than an hour.

 

 

 

Features

ProMelt Technology

  • The 4 chamber melting system offers more surface area to melt thermoplastic quickly
  • With 100000 BTU’s the melt time is faster resulting in more finished jobs every day

SmartDie II System

  • Fast change-out system – Hardened steel dies with a built-in mil thickness adjustment system
  • Use with or without heat – Allows you to optimise your striping in all weather conditions
  • “Floats” with the surface – Puts the thermoplastic where you want it for superior line quality
  • External heat system – 4-Torch die heat system keeps it hot

135 kg Material Kettle

  • Easy-to-fill kettle with PaddleMax Dual mixer for improved mixing

40 kg Split Bead Hopper System

  • Perfectly matched to the material kettle with a superior flow design
  • No-tool system allows fast and easy line width changes

Ease-Z-Steer Handle Bar System

  • Makes turning and handling as simple as a LineLazer system
  • Adjustable handle bar for users of all sizes

Bead Dispense System

  • No-tool system allows fast and easy line width changes
  • 30 cm dispenser with 2.5 increments allows you to “dial-in” the drop rate

Ergonomic Design

  • Easier to use and almost effortless to push/pull, just like the proven LineLazer design

Optional LineDriver System

  • Double your striping productivity and get straighter lines with less fatigue
  • Move between jobs without having to push
  • Patented Dual Pedal System – Multiple positions allow for simple forward and reverse

Technical Specifications

 

Compatible Material Thermoplastics, Glass Beads, Alkyds
Compatible Surfaces Pavement
Gun Activation Manual
Includes SmartDie II
Maximum Working Pressure (bar) 17.24
Maximum Working Pressure (kPa) 172.4
Maximum Working Pressure (psi) 250
Model ThermoLazer
Number of Colours One Colour
Number of Hoppers 1
Power Source Gas
Series ProMelt
Type Walk-Behind Line Striper
Weight (kg) 157

 

Graco LineLazer ES 500 electric2

Graco LineLazer ES 500 electric

Graco LineLazer ES 500 electric

 

 

 

Graco LineLazer ES 500 electric battery-powered airless line striper

The Graco LineLazer ES 500 is a fully-capable line striper for those small to medium-sized restripe jobs, while introducing the benefits of battery-powered technology. It comes with two DeWALT batteries and a fast charger that enables you to work virtually continuously!

All fluid passageways are upgraded for use with fast-dry, waterborne traffic paints (hose, gun and fittings).

 

 

Features

 

No engine noise, exhaust fumes or vibration

  • Complete your job with improved jobsite conditions without interruption
  • Reduce user fatigue while delivering perfect line

Quiet, reliable power

  • Achieve an unlimited run time with swappable high-capacity DEWALT® 9.0 Ah FlexVolt® batteries
  • Stripe immediately up to 38 litres with two fully charged batteries
  • Delivered complete with two batteries for continuous stenciling and striping
  • A fan-cooled fast charger recharges the battery in under 60 minutes

Easier manoeuvrability

  • Front swivel wheel allows to stripe right up to the curb and makes easy work of hard-to-do curves
  • Tapered locking pin design provides years of dependable operation

EasyMark gun adjustment system

  • Simple guide mark system
  • Easy gun on/off, front/back
  • Perfect gun set up every time

Handlebar design

  • Adjustable design, allows for optimal ergonomics and reduced vibration on your hands for all-day striping comfort
  • Contoured grips comfortably fit your hands

Durable pump

  • Our endurance pump lasts 2x longer than the next leading brand
  • Long life V-Max blue packings, Chromex rod, and hardened stainless steel cylinder
  • Faster cleaning with the QuikAccess intake valve
  • The ProConnect pump can be swapped in minutes without tools eliminating costly downtime

Rear mount hose wrap

  • Provides easy on/off for stenciling applications

Technical Specifications

 

Maximum Flow Rate (L/min) 1.8
Maximum Tip Size (in) 0.021
Maximum Working Pressure (bar) 227
Maximum Working Pressure (kPa) 2270
Maximum Working Pressure (psi) 3300
Model LineLazer
Power Rating (AH) 9.0
Series ES 500
Type Walk-Behind Line Striper
Weight (kg) 55