Mech. Equipment

LineLazer V 200DC Standard Series Airless Line Striper, 2 Manual Guns

 

 

LineLazer V 200DC

The Graco LineLazer V 200DC Standard Series provides a cost-effective dual colour striping solution for smaller applications. Maximise productivity with systems that provide quick and easy adjustments, including the EasyMark Gun Adjustment System, EZ Align Wheel Adjustment System and more.

The Graco LineLazer V Standard Series is ideal for the higher production re-striping contractor completing larger re-striping jobs and considering jobs with basic pattern applications requiring a single-colour, single or dual gun striping solution.

 

 

 

 

Dual colour Capable

  • Dual colour applications with a single unit improves efficiency and profitability

Dual 38 Litre Paint Hoppers

  • Extended striping time with large capacity hoppers

Dual Graco Hydraulic Motors

  • No-stall hydraulic design provides uninterrupted performance

LiveLook Display with SmartControl

  • Track, measure and control every aspect of your job
  • Real-time information for the perfect lines

Honda® GX200 Engine

  • Reliable and easy-to-start
  • Contractor-preferred – excellent power and proven reliability
  • Oil Alert shuts down engine to prevent damage if oil level drops too low

EasyMark Gun Adjustment System

  • Simple guide mark system
  • Easy gun on/off, front/back
  • Perfect gun set up every time

EZ Align Wheel System

  • Simple front wheel alignment keeps unit tracking straight
  • Intuitive design without needing any special tools

DualComfort Handlebar System

  • Fits all users and easy to adjust
  • Solid 4-bolt design

Endurance Chromex Pump

  • Long life pumps provide precise flow for a wide range of striping materials
  • Industry-best pump performance with field-proven design
  • Handle the most demanding materials with long-life rod treatment – 4x harder than ordinary chrome

Additional Features

  • High-Capacity Cooling System
  • QuikSelect Gun Selector
  • Easy Out Pump Filter
  • Flex Plus Guns

Technical Specifications

Compatible Material Road-Marking Paint
Compatible Surfaces Pavement, Turf
Engine Model GX200
Fuel Tank Capacity (L) 3.6
Gun Activation Manual
Hopper Volume Capacity (L) 38
Includes Flex Plus Gun (2), LineLazer RAC 5 319 Spray Tip (2), LineLazer RAC 5 421 Spray Tip (2), RAC 5 Tip Guard (2), 3/8 in. x 3.7 m (12 ft) BlueMax II Airless Hose (2), 3/8 in. x 0.9 m (3 ft) BlueMax II Airless Whip Hose (2), TSL, 118 ml (4 oz)
Maximum Flow Rate (L/min) 8.14
Maximum Sound Pressure Level (dB(A)) 85.5
Maximum Tip Size (cm) 0.0838
Maximum Tip Size (in) 0.033
Maximum Tip Size (mm) 1.194
Maximum Working Pressure (bar) 227
Maximum Working Pressure (kPa) 2270
Maximum Working Pressure (psi) 3300
Model LineLazer V
Number of Colours Two Colours
Number of Guns 2
Number of Hoppers 2
Number of Pumps 2
Overall Height (cm) 113.03
Overall Height (mm) 1130.3000
Overall Length (cm) 174.63
Overall Length (mm) 1746.25
Overall Width (cm) 87.0
Overall Width (mm) 869.9500
Power Rating (kW) 4.85
Power Source Gas Hydraulic
Product series Standard
Pump Type Endurance
Series 200DC
Type Walk-Behind Line Striper
Weight (kg) 173

WATER BLASTING JET

  • Removal of all road markings, regardless of age, thickness and texture
  • Removal of rubber from airport runways and race car and motorcycles tracks
  • Recovery of skid resistance
  • Adobe-PDFSee results pressing here.

waterblasting

Investing in improvement of road safety, airports, parking etc., the company has a huge amount of assets in modern innovative special machinery, equipped with the innovative high pressure water method. This method has outstanding tested results in rubber removal (especially in airport runways), in old road markings removal ( of any texture, quality or age), as well as the recovery of skid resistance, that is being caused due to heavy traffic load or even with normal wear combined with adding pollutants, mainly in rain conditions.

So, technology of Water Blasting Jet is even more developed according to specific requirements of road maintenance, as its utility for skid resistance in highways, sharp turns, in high load traffic roads, in big cities with avenues, is vital for human life that is being saved when the road are well preserved whereas at the same time any functional costs are successfully being reduced (and for maintenance), because any refitting asphalt is being avoided, while the road accident reduction restricts any financial effects.

Water Blasting Jet is globally considered to be from all the airports around the world as the main method of removing rubber and old road markings from runways, tracks and other surfaces. Water Blasting Jet cannot be compared with any other conventional water pressure systems. The high pressure of 2500 to 3000 bar and the special patented sprey system is considered to be really unique.

 

GENERAL INFORMATION

Removal of road marking materials, fast, with the least amount of shadows and no trace of former road marking material.

WATER BLASTING JET is ideal for road marking material removal, (one component paint, two component cold plastic, thermoplastic, epoxide, prefabricated tapes etc.) regardless of the age of the material, the texture and the thickness under any surface. Even if the asphalt surface is soft, WATER BLASTING JET is the best method, not only for road marking material removal, but for recovery of skid resistance as well, without causing any damage on the surface. With maximum total width of 2200 mm in one layer, gives outstanding results in lubricity. The clean and scrub method improves at exceptional level the road skid resistance

 

Main applications for road maintenance work are:

  • Every type of road surface (cement, asphalt, etc)
  • Parking for vehicles, buses, taxi
  • Pedestrian’s crossings
  • Tunnels
  • ‘Every region of the airports
  • Test tracks
  • Race tracks
  • Toll stations
  • Bus lines
  • Bicycle paths

WATER BLASTING JET is removing all rag types and hazardous waste such as rubber trace, fuel leaks, oil leaks, plumbing liquids, road marking paints, graffiti paints etc. The reduced noise pollution and at the same time vacuum recovery make WATER BLASTING JET system environmentally friendly, while simultaneously high efficiency is being achieved, without causing any damage on the surface.

 

OUR SERVICES

Rubber removal from airport runways and race car and motorcycle tracks

(Why WATER BLASTING JET method is a must)

  • It removes rubber rags 100%
  • Does not harm the surface
  • The material to be removed is removable with outstanding results, regardless of the resilience
  • No rags after application
  • Fast, ecofriendly, value for money and always with safety

RENAULT 2-45DTM

RENAULT 2-45DTM 1RENAULT 2-45DTM 2

Vernicol S.A company with the purpose of continuous growth and development in the road safety section has in it’s property seven shotblasting machine trucks.

2-45DTM truck-mounted shot blaster is one of the most adaptable and productive of the large horizontal blast cleaning machines in our equipment line. The DOT highway approved vehicle is completely self-contained and specifically designed for surface preparation specialists doing jobs that require limited downtime, such as airports, highways, bridges and other large projects. The 2-45DTM provides a virtually dust-free, environmentally friendly work environment for the operator and others on the same site. The remarkable 2-45DTM ( shotblasting ) converts from a transport to a high production, environmentally friendly, shot blasting road machine.

Specialty contractors can drive to the job with all equipment, personnel, and supplies safely in a single vehicle. All controls, dust collection, spares, consumables, and the blast head, are protected in an enclosed truck body equipped with a lift-gate. Work is started after quick mounting of the blast head, converting the over-the-road vehicle to effective work machine.

MAN 2-45DTM

MAN 2-45DTM

Maycon company with the purpose of continuous growth and development in the road safety section has in it’s property seven shotblasting machine trucks.

2-45DTM truck-mounted shot blaster is one of the most adaptable and productive of the large horizontal blast cleaning machines in our equipment line. The DOT highway approved vehicle is completely self-contained and specifically designed for surface preparation specialists doing jobs that require limited downtime, such as airports, highways, bridges and other large projects. The 2-45DTM provides a virtually dust-free, environmentally friendly work environment for the operator and others on the same site. The remarkable 2-45DTM converts from a transport to a high production, environmentally friendly, shot blasting road machine.

Specialty contractors can drive to the job with all equipment, personnel, and supplies safely in a single vehicle. All controls, dust collection, spares, consumables, and the blast head, are protected in an enclosed truck body equipped with a lift-gate. Work is started after quick mounting of the blast head, converting the over-the-road vehicle to effective work machine.

MERCEDES BENZ 2-45DTM

MERCEDES BENZ 2-45DTM1MERCEDES BENZ 2-45DTM2

The 2-45DTM shot blaster is perfectly suited for road maintenance, asphalt retexturing, bridge deck preparation, airport maintenance and much more. It is also designed for skid resistance enhancement on roads, bridges, and runways. Road/runway markings removal or compounded-rubber removal can also be completed with virtually no dust, debris or water.

The 2-45DTM is a shot blaster that is delivered “turn key” and is very user and environmentally friendly. Blastrac is the most experienced manufacturer of equipment for shot blasting roads and runways world wide. Our 2-45DTM is the best possible and most cost effective and efficient solution to regenerate the macro and micro texture of road and runway surfaces. Because of its high performance and reliability it is possible to treat a surface of up to 3000 m2 per hour on roads and runways.

The 2-45DTM is completely self-contained and is ideal for surface preparation specialists, doing jobs with limited downtime allowed for jobs such as:

  • Airports
  • Roads
  • Motorways (highways)
  • Bridges
  • Ramps
  • Many more.

Blastrac 2-45DTM

The 2-45DTM is a shot blaster that is delivered “turn key” and is very user and environmentally friendly. Blastrac is the most experienced manufacturer of equipment for shot blasting roads and runways world wide. Our 2-45DTM is the best possible and most cost effective and efficient solution to regenerate the macro and micro texture of road and runway surfaces. Because of its high performance and reliability it is possible to treat a surface of up to 3000 m2 per hour on roads and runways.

  • Closed circuit which is dust free.
  • Excellent separation system dust / abrasives by improved magnet separation system.
  • High power hydraulic motors 2 x 30 kW.
  • Versatile / Heavy duty / High performing machine.
  • Magnetic separator, to perform well on sticky coatings and big quantities of dust.
  • Optimal use on asphalt and concrete, but can also be used on steel.
  • Homogenous blast pattern as well for light as heavy blasting purposes.
  • Can be used for floor preparation / renovation / maintenance and decorative purposes.

Technical Specifications 2-45DTM

Name Description
Working width 1150mm
Shotblasting capacity Up to 3000m²/h on concrete or asphalt  (depending on hardness, regulation requirements and pollution)
Drive system / speed Hydraulic / 0 to 4.7 km/hr
Weight 1750kg (without side shift and drive unit)
Working speed 0,5 to 40 mtr/min
Dimensions (L,W,H) 1250mm / 1300mm / 1300mm
Application Concrete / Asphalt / Steel

Options / Accessories 2-45DTM

Name Description
20m suction hose Ø150 001112
Abrasive S390 / S460/ S550/ S660 999-0390 / 999-0460/ 999-0550/ 999-0660
2-20DT attachment 2-20DTA-UNIT
Magnetic broom R900 B22055
Fully automatic sweeper 2-45TBS 2-45TBS-0000
Personal safety features On request / See manual

BMR – 85D

The Blastrac BMR-85D is a multi-functional and hydrostatically driven machine. It has a side shift and an on-board dust collection system with big bags which removes airborne particles and contaminants such as paint, surface residues, rubber and debris. The BMR-85D can handle multiple attachments, for different applications, such as:

  • Scarifying / Milling (line removal)
  • Shot blasting (rubber removal)
  • Sweeping (cleaning)

The removable shot blasting head is excellent for treating the potential danger of aquaplaning and grip loss. This machine is particularly well known in the airport industry to remove rubber on runways. It also improves surface texture which increases grip. This helps to prevent accidents and runway excursions. The BMR-85D has a daily performance of around 2.000 m² on runways.

BMR-85DBMR-85D

The Blastrac BMR-85D purchased by ENANA (airport authoritiesin Angola) for the purpose of rubber removal at the airport of Luanda, was shipped to Angola in a 20ft container with all the required equipment. At the moment, they have a blasting job of 10.000 m² with the potential to blast the whole runway.

Luanda airport and other airports in Angola, will be treated from now on with our environmentally friendly system where performance and manoeuvrability is combined.
This makes the shot blasting technology the best solution for these purposes.

The BMR-85D is a complete ready to use professional solution for the surface preparation of large horizontal surfaces.

The system features a butterfly valve to seal the dust outlet when removing or replacing the industrial “super-sack” bags, allowing little-to-no dust to be re-introduced into the surrounding environment.