DEGAVER is the trading name of VERNICOL SA for a range of products based on methacrylic resins are used as the highest quality and durability road marking materials. Materials DEGAVER consist of at least two components, the basic material called DEGAVER and hardener in liquid or powder form. After mixing of two materials is achieved by the chemical reaction a rapid curing from 10 to 30 minutes depending on the temperature during application.
The materials of these species, which are used for permanent markings based on acrylic resins (MMA) and two components react at room temperature, commonly called cold plastics.
Physical traits of cold plastic DEGAVER is their applicability even at very low temperatures simply by increasing the ratio of hardener. Applied as remarking material without necessary milling to remove the old striping, providing there are no loose parts that will prevent proper adhesion of the material. Among other materials DEGAVER striping materials due to the high internal elasticity are not borne by the breaking or cracking of the asphalt while creating an extremely resistant to weathering behavior with high mechanical strength. All these physical properties DEGAVER prerequisite for a material must comply with the regulations of marking materials for high brightness, anaklaotikotita, slip resistance and durability.
Supernumerary advantages combined with the known friendliness to the environment, becoming arguably as the best solution for permanent markings high standard.
Supernumerary advantages combined with the known friendliness to the environment, becoming arguably as the best solution for permanent markings high standard.
The cold plastics applied by various methods, such as spray example in various ratios 100:2, 1:3, 1:4, 1:1, depending on the spray system of the machine, in a thickness of 0.6 to 1.2 mm or diastroumena in thickness from 1.2 to 3.0 mm All these differences in application are known to VERNICOL since 1989 and are offered according to customer requirements.
€ Ask for an offer