VERNITHERM A-500 is an oil and grease resistant, durable, thermoplastic pavement marking material. Maleic modifications to the base resin impact polar characteristics to the thermoplastic system which promote excellent retention of glass spheres over conventional aliphatic C-5 hydrocarbon thermoplastic systems.
The cold flow properties of VERNITHERM A-500 impart resistance to freeze thaw cracking.
It has an excellent color, fluidity and heat stability.
It can be applied using special machines with agglomerate systems (DOT line, SPOT line e.t.c.)
Recommended uses
VERNITHERM A-500 can be used on all bituminous pavement surfaces.
Concrete or cementbound surfaces require the application of a primer/sealer prior to striping.
Recomeded for countries with tropical clima.
|
TECHNICAL CHARACTERISTICS |
|
|
Color |
White |
|
Layer thikness |
2.0 – 4.0 mm |
|
Softening point |
> 110°C |
|
Heat stability |
b>0,85 |
|
Prossecing temp |
200 – 220°C |
|
Flash point |
>240°C |
|
Drop-on agent |
approx. 350g/m2 ECHOSTAR TRM to be dropped on the hot, freshly applied line. |
Dosage
An adecuate film thickness is obtained by a dosage among 4000 and 8000 g/m2 of thermoplastic.
Health and safety
Please refer to the labeling mentioned on the can. In case more information is needed refer to the Material Safety Data Sheet.
See all our brochures (containing this product) by pressing here.
